Search
Close this search box.
Search
Close this search box.

System-Integrated Air Sanitization

Air Sniper system-integrated air sanitization solutions can be easily incorporated into new or existing HVAC systems to protect your plants from harmful mold, bacteria, and other contaminants. These units are placed on the return and/or supply side of the system and use the power of the mechanical system rather than having their own internal fan. Now you can take your commercial grow’s hygiene to the next level with UVC air purification technology. Third party test results show that over 99.9% of airborne viruses, bacteria and molds, including botrytis (grey mold) and powdery mildew, are completely destroyed before they can harm your plants.

In-Line equipment: Air Sniper Inflow 10/24Air Sniper Inflow 16/20Air Sniper Inflow 16/36Air Sniper Inflow 36/36Air Sniper Induct 300W

air sniper inflow installation

AIR SNIPER INFLOW 10/24

The Air Sniper Inflow 10/24 Air Treatment System was designed and developed to sanitize the air rather than filter it. We achieved this by maximizing the UVGI output while creating scientifically measured dwell time and molecule contact to ensure the destruction of all unwanted pathogens. The Air Sniper Inflow 10/24 has been designed to fit into existing HVAC systems with ease and incorporates a Wi-Fi connection for remote monitoring and control. Air Sniper has also developed this system as a plug-and-play product and eliminates the need for expensive electrical connections.

  • Easy plug-and-play installation (No Need for Electrician)
  • 18x Ultra High-Intensity 36-Watt UVC Lamps (648 watts total)
  • 1x Ultra High reflective tunnels (93% UVC reflective factor)
  • Wi-Fi Enabled for remote monitoring and control
  • Multitask colour touch screen for maintenance and manual monitoring
  • Differential pressure sensor on board for any up-stream filter system
  • Flow control for ON/OFF cycle
  • No Ozone
  • Lamp change recommended after Approx. 13,000 hours of on-time (approx. 3 years)
  • 100% UVC exposure along with enough dwell time to achieve maximum irradiation performance and kill ratio of unwanted pathogens
  • Destroys 99.9% of Airborne Pathogens
 
Power Requirements110V, 50/60HZ
Energy Consumption5 Amps @ 110V
Weight50 lbs (23 kg)
Control PanelOn/Off Switch
Housing MaterialAluminum
Dimensions37″ (L) x 24″ (H) x 10″ (D)
AirflowFlow Switch Detection on/off cycle
Electrical Safety CertificationETL Certification
Maximum CFM Allowance1,500 CFM
Static Pressure0.79 wc

Looking for air purification solutions? Get in touch with a Surna Cultivation Technologies representative.

Looking for air purification solutions? Get in touch with a Surna Cultivation Technologies representative.

AIR SNIPER INFLOW 16/20

The Air Sniper Inflow 16/20 Air Treatment System was designed and developed to sanitize the air rather than filter it. We achieved this by maximizing the UVGI output while creating scientifically measured dwell time and molecule contact to ensure destruction of all unwanted pathogens. The Air Sniper Inflow 16/20 has been designed to fit into existing HVAC systems with ease and incorporates a Wi-Fi connection for remote monitoring and control. Air Sniper has also developed this system as a plug and play product and eliminates the need for expensive electrical connections.

  • HVAC Easy-Fit Bulkhead
  • No Ozone
  • 3x UVC Reflective Tunnels
  • Plug-and-Play
  • Wi-Fi Enabled for Remote Monitoring and Control
  • Auto Lamp Detection
  • Multitask Colour Touchscreen for Maintenance and Manual Monitoring
  • Destroys 99.9% of Airborne Pathogens
Power Requirements220V, 50/60 HZ
Energy Consumption5 Amps @ 220V
Weight60 lbs (27 kg)
Control PanelColour Touch Screen Wi-Fi Enabled
Housing MaterialAluminum
Dimensions45.18” (L) x 22″ (H) x 18.75” (D)
AirflowFlow Switch Detection On/Off Cycle
Electrical Safety CertificationETL Certification
Number of Bulbs30 x 36-Watt Bulbs
Maximum CFM Allowance2,500 CFM
Static Pressure0.79 wc

Looking for air purification solutions? Get in touch with a Surna Cultivation Technologies representative.

AIR SNIPER INFLOW 16/36

Install the best constructed industrial-scale air sanitization equipment with UVC technology in your facility’s HVAC system. The Air Sniper Inflow 16/36 has a maximum 5,000 CFM allowance and 5x UVC reflective tunnels. Destroys 99.9% of pathogens!

  • HVAC Easy-Fit Bulkhead
  • No Ozone
  • 3x UVC Reflective Tunnels
  • Plug-and-Play
  • Wi-Fi Enabled for Remote Monitoring and Control
  • Auto Lamp Detection
  • Multitask Colour Touchscreen for Maintenance and Manual Monitoring
  • Destroys 99.9% of Airborne Pathogens
Power Requirements220V, 50/60 HZ
Energy Consumption8 Amps @ 220V
Weight100 lbs (45 kg)
Control PanelColour Touch Screen Wi-Fi Enabled
Housing MaterialAluminum
Dimensions45” (L) x 37″ (H) x 21” (D)
AirflowFlow Switch Detection On/Off Cycle
Electrical Safety CertificationETL Certification
Number of Bulbs50x 36-Watt bulbs
Maximum CFM Allowance5,000 CFM
Static Pressure0.98 wc

Looking for air purification solutions? Get in touch with a Surna Cultivation Technologies representative.

Looking for air purification solutions? Get in touch with a Surna Cultivation Technologies representative.

AIR SNIPER INFLOW 36/36

Install the best constructed industrial-scale air sanitization equipment with UVC technology in your facility’s HVAC system. The Air Sniper Inflow 36/36 has a maximum 10,000 CFM allowance and 10x UVC reflective tunnels. Destroys 99.9% of pathogens!

  • HVAC Easy-Fit Bulkhead
  • No Ozone
  • 10x UVC Reflective Tunnels
  • Plug-and-Play
  • Wi-Fi Enabled for Remote Monitoring and Control
  • Auto Lamp Detection
  • Multitask Color Touchscreen for Maintenance and Manual Monitoring
  • Destroys 99.9% of Airborne Pathogens
Power Requirements220V, 50/60 HZ
Energy Consumption15 Amps @ 220V
Weight200 lbs (90 kg)
Control PanelColour Touch Screen Wi-Fi Enabled
Housing MaterialAluminum
Dimensions49″ (L) x 37″ (H) x 32″ (D)
AirflowFlow Switch Detection On/Off Cycle
Electrical Safety CertificationETL Certification
Number of Bulbs100x 36-Watt Bulbs
Maximum CFM Allowance10,000 CFM
Static Pressure0.99 wc

Looking for air purification solutions? Get in touch with a Surna Cultivation Technologies representative.

AIR SNIPER INDUCT 300w

The Air Sniper Induct 300W Air Treatment Systems are designed to fit seamlessly within a new or existing HVAC system to sanitize the air as it flows through the facility. The 300 Watt UV bulb equipped on the Induct will turn on when airflow is detected. These units are UL2998 certified to produce no ozone and the bulbs have a 5-year (43,800 hours) lifespan. 

We offer three versions of this system to best suit your building requirements. These include:

  • BAS compatible
  • Standard
  • Wi-Fi (contact Air Sniper to inquire about this model)
  • Easy Plug-and-Play Installation
  • 300 Watt Bulb
  • Wi-Fi Available
  • No Ozone (UL2998 Certified)
  • Status Indicator
  • Destroys 99.9% of Airborne Pathogens
Power RequirementsSingle Phase, 208V AC 50/60 Hz
Energy Consumption1.8 – 3.5 Amp Max
Weight15 lbs (7 kg)
Control PanelOn/Off Switch
Housing MaterialAluminum
Dimensions25″ (H) x 10″ (W) x 5.36″ (D)
Electrical Safety CertificationcETLus Certified UL and CSA Standards
ControlDifferential Pressure Switch
Operating Temp. Range-25C/+100C
Recommended Airflow500 – 2500 CFM
Status IndicatorStatus/bulb life indicator

Looking for air purification solutions? Get in touch with a Surna Cultivation Technologies representative.

Contact Us

Ready to get started or learn more about how we can help your facility succeed? Fill out the form and a company representative will be in touch.

Area of Support*

Contact Us

Ready to get started or learn more about how we can help your facility succeed? Fill out the form and a company representative will be in touch.

Area of Support*
Sign up to receive blogs and other news

Footer

© 2024 Surna. All rights reserved.
Surna
Scroll to Top